Nutech Engineers
143-D Government Industrial Estate, Kandivli West, Mumbai - 400 067
Phone : 91-22-28683549 / 28684580,  Fax : 91-22-28674580
email : nutechen@vsnl.com , nutechen@mtnl.net.in,
info@nutechengineers.com,  sales@nutechengineers.com

• Platinum, 13% Rhodium-Platinum
• Platinum, 10% Rhodium-Platinum
• Platinum, 30% Rhodium-Platinum, 6% Rhodium
• Tungsten, 5% Rhenium - Tungsten, 26% Rhenium
• Platinel II

Limits of Error (24 AWG)

• Standard
• Special - for Types B, S, and R only

CAUTION: Platinum and Platinum alloy thermocouple wire is extremely susceptible to contamination from elements such as silicon, iron, zinc, calcium, etc.  Keep Platinum and Platinum alloy thermocouple wire clean both before and during use.  Contamination causes negative direction drift and weakening of the wire.  They should always be used with Aluminum Oxide protection tubes and insulators over 1200^oC.

The elements consist of standardized and matched wires, individually checked.  the elements are sensors for any make of millivolt meter or solid state indicator or controller.  The hot junctions of noble metal elements are end contact welded.

The two insulated elements that follow are both or either General Purpose or Weatherproof Heads

This insulated element is for Single Element and Dual Element For all ceramic Protection Tubes

The Insulated element is only for Single Element, with Alumina Insulators, and is only for assemblies which have a Silicon Carbide Protection Tube

Thermocouple Types

• Platinum, 13% Rhodium-Platinum (R)

• Platinum, 10% Rhodium-Platinum (S)

• Platinum, 30% Rhodium-Platinum, 6% Rhodium (B)

• Tungsten, 5% Rhenium - Tungsten, 26% Rhenium (C)

• Platinel II (F)

For Laboratory Head, Straight, Single Element, Ceramic Insulators

Color on Positive Leads

• R : Blue or Black

• S : Clear

• B : Yellow

• C : Green

• F : Yellow and Blue or Black